Rapid Film Techniques: Make Your Own Studio At Home

Have you ever wanted to film from home but missing some filming gear? You still haven’t acted because of a limited budget. Well, in this article, we will share 5 tips and tricks to help you film at home. So let’s dive into it.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Part 1. Hack. DIY A Flag for Lighting Control

When we set up the light near the subject, the light might be leaked onto the background. So, we may need to shape it to block the light from hitting the background.

On film sets and studios, the professionals use flags to absorb and make shapes of light. A flag is a thick black fabric that does not reflect light. To make your flag at home, you can try cardboard and a black t-shirt.

1. A Cardboard

You can buy it from a nearby stationery store. Ensure the cardboard is not too big to fit the t-shirt around the board.

2. A Black T-shirt

For the black t-shirt, you can use an old t-shirt that you don’t wear anymore. You can also find these shirts at your local thrift shop.

After managing all the required things, you must wrap and secure the t-shirt around the board. If the size of the t-shirt is larger than cardboard, tie the sleeves to secure the t-shirt. Or you can also use tape to secure the t-shirt and fasten it on the backside.

With this DIY flag, you can now easily give shape and block the light while filming at home. Warnings: Some fabrics are not fireproof, so always keep an eye on the flag.

Final Results for the Flag Light Shaping

After filming the video, see the precise results before using the flag, when the light is dispersed everywhere, which makes a euphoric effect. While after using the flag, the light is only glimpsing the subject.

Part 2. Hack. DIY Black Wrap or Cinewrap

The black wrap is used in professional studios and set up to block and shape light. You can block light by directly giving shape to LED lightbulbs. The black wrap is made mainly of aluminum, so it’s easy to provide forms for different lights.

The aluminum foils used in households have the same characteristics as a black wrap, so that you can use it as an alternative. Look at the following requirement to make it! To make a black wrap, you need two household tools. There is no need to get pricey things from the market. For this, follow the below outlines of the tools!

1. A Light Bulb

You can take any LED bulb present at our home. Ensure that the bulb size is manageable to avoid any issues handling it.

2. Foil Paper

The foil paper used to cover the lightbulb should be aluminum because foils usually absorb the light and get fired. In contrast, aluminum foil is resistant and doesn’t produce too much heat.

Now, all the tools are ready and waiting for further processing. For this, follow the processing step to make it work. To proceed further, you have to follow the below step-by-step process as shown:

Step1 First, carefully wrap the bulb with the foil paper to shape the light.

Step2 Then, you need to install the bulb on the lamp.

Note: During wrapping, you don’t have to allow the foil to touch the bottom part of the bulb.

Step3 Leave a small part of the bulb open from the top and cover the part from the side.

Step4 Ensure the lamp switch is off, and install the light bulb.

When you turn on the lamp, the light has been shaped into a smaller light source.

Final Results for the Black Wrap or Cinewrap

You can observe that the light is only at the required place, with no dispersion observed and no scattering. You can create more shapes to foil and then wrap them on the bulb for a different look.

After experimenting with light shaping and blocking hacks, we will move toward the light reflector hack!

Part 3. Hack. DIY Light Reflector

A reflector is a spontaneous or specialized reflective surface that diverts the light to our subject or object. Professional filming setups usually use a large reflector to get a glowing effect on a subject or even more than two.

When applied to flat surfaces, the foil has a reflective surface. It makes it the best alternative to a professional reflector. To make your one, you will need

Also read: